|
|
 |
|
Want to hear the magnetic fields you encounter in stereo? Measure ELF/VLF magnetic fields in the frequency range
of 20 - 10,000 Hz, with a minimum sensitivity of .25 mG.? Locate live electrical wires inside or behind plaster, drywall,
wood, paper, plastic, etc? Detect a break in an electric circuit (Christmas lights, extension cords) check wires, fencing,
appliances, fuses to see if they are energized remotely check high voltage power lines check spark plugs and distributor wires
of operating automobile engines locate sources of electric fields?
|
 |
|

Receive shipment of these items to lower 48 quickly by standard delivery.
|
 |
|
|
 |
|
 |
 |
| |
| |
MicroAlert will respond to as little as 0.1 µW/cm² in highest sensitivity mode. When MicroAlert is moved closer to the
source of RF radiation, the chirps will become more frequent, and will become a solid tone when exposure is high. Responds
to frequencies from 500 kHz to 3 GHz, although response is not flat over this range. What this means is that at any given
setting, the threshold will vary with frequency. Note: This is not a high precision meter. Sensitivity information is only
a guideline.
The beeping alarm threshold can be adjusted from no threshold (constant beeping regardless of radiation exposure), to
to a maximum of about 10 microWatts/cm². It is intended to be an alarm for cell phones, cell towers, microwave ovens, surveillance
bugs, and most RF transmitters.
Only 1-5/8" x 2-1/4", the 1 oz. MicroAlert uses one Lithium coin cell #2032 which should last about 3 years with normal
use. Includes convenient belt clip. 1 year mfr. warrantee.
MicroAlert (Cat. #GIVA158) .....$89.95
MicroAlert (Cat. #GIVA158)...$89.95
|

|
| GIVA158 |
|
|
 |
 |
|
 |
|
 |
 |
| |
| |
Pocket Sized E-Field Detector Not a toy but a real Electric Field detector! Features include LED indicator light,
audible intensity signal, rotary on/off switch, and pocket clip. Does not give you a numerical readout, but it will tell you
if high E-fields are present or not. Red LED lights when field is detected and audible tone gives indication of field strength
and frequency. Useful for detecting and tracing live wires (50/60 Hz, 100-600v) and comparing safe distances from similar
appliances. Rotary switch permits adjustment of sensitivity. Requires 2 AA batteries. Use the ELFLX to: locate live
electrical wires inside or behind plaster, drywall, wood, paper, plastic, etc. detect a break in an electric circuit (Christmas
lights, extension cords) check wires, fencing, appliances, fuses to see if they are energized remotely check high voltage
power lines check spark plugs and distributor wires of operating automobile engines locate sources of electric fields (such
as lamp cords, clocks, electric blankets) which may pose health problems if too close to people and animals
ELFLX Detector (Cat. #GIVA195)...$9.95
|

|
| GIVA195 |
|
|
 |
 |
|
|
|
|
|
 |